Wireless intercom system WAVECOM-507
The Wavecom-507 is a complete intercom system to be used mainly in TV studios, mobile units or video productions.
It works like a continuous duty cycle repeater, in this way, always is present the bradcast carrier to be listen by all the working crew using the system. Reception and transmission frecuencies can be reprogrammed easyly by PC.
Specifications
| TX Radio | |
|---|---|
| Frecuency range | 140-500 MHz* |
| Power | 3W (other upon request) |
| Channels | 16, PLL digital |
| Channel selection | Digital Encoder |
| Modulation | FM |
| Output impedance | 50 Ω |
| Spurious emissions | < 60 dBc |
| RF connector | BNC |
| Delayed ON and channel change | |
| TX Audio | |
| Inputs | Tranformer balanced line (rear) mic for the headset (front) |
| NR system | Compressor limiter SILENZO+ |
| Outputs | Headphone (front) and line (rear) |
| Monitor Control | Front Panel |
| AF Bandwidth | 200 Hz/5 KHz* |
| Distorsion | < 1,5% |
| Audio connector | XLR4 (headset) XLR3 (line) |
| SNR | > 70 dB |
| RX Radio | |
| Frecuency range | 140-500 MHz* |
| Sensitivity | -114 dBm / 12 db SINAD |
| Channels | 16, PLL digital |
| Channel selection | Digital Encoder |
| Demodulation | FM |
| Input impedance | 50 Ω |
| Spurious emissions | < 2 nW |
| RF connector | BNC |
| RX Audio | |
| Outputs | Transformer balanced line (rear) and speaker for headset (front) |
| NR system | Expander SILENZO+ |
| Controls | Monitor volume, Line OUT, Gain IN |
| AF bandwidth | 200 Hz/5 KHz* |
| Distorsion | < 1,5% |
| Audio Connector | XLR4 (headset) XLR3 (line) |
| SNR | > 70 dB |
| General | |
| ON/OFF switch | |
| TALK indicator | |
| Inner 6 cavities duplexer with type N connectors | |
| RX open indicator | |
| Aluminium enclousure | |
| Audio peak indicator | |
| Dimensions | 19”x1HUx250mm |
| Power | 12V / 1,5A |
| Weight | 3 kg |
| Power supply included | |
* Other upon request.